|
|
|
| DESCRIPTION | DIMENSIONS | MATERIAL | FORGED WT (MT) |
| STEEL RINGS ( Max. dia.=4500mm, Ht.=800mm ) | |||
| Ring | Dia.4500 / 3800 x 450 mm | AISI 1020 | 30 |
| Half Rim | Dia.4150 / 3400 x 730 mm | EN 25 | 27 |
| Rim | Dia.2300 / 1950 x 520 mm | EN 26 | 5 |
| Gear Blank | Dia.4165 / 3760 x 700 mm | EN 24 | 30 |
| SHAFTS ( Max. length=20000mm Max.dia.=1600mm ) | |||
| Propeller Shaft | Dia.366 x 18456 mm | EN 24 | |
| Intermediate Shaft | Dia.600 / 260 x 9700 mm | EN 24 | |
| Crusher Main Shaft | Dia.1150 x 8500 mm | EN 19 | |
| Bell Rod | Dia.250 x 1700 mm | EN 19 | |
| Long Shaft | Dia.320 x 1100 mm | 34CrMo4 | |
| POWER SECTOR FORGINGS | |||
| Turbo Generator | Dia.1180 x 10570 mm | 35Ni3Cr12 | 61 |
| Hydro Turbine Shafts | Dia.1920 x 5000 mm | 27 Mn2 | 48 |
| Hydro Generator Shaft | Dia.1900 x 5000 mm | 27 Mn2 | 54 |
| Industrial Rotor | Dia.1250 x 7100 mm | 30CrMoNiV511 | 33 |
 Home |
 Back |
 Next |